Electrical Connector Pictorial Options with Reference Designators
The PS71 family of Pressure Switches are available with a variety of electrical connection options. The listing below will show a picture of what the connection looks like as well as a description of the options.
-SP- (Spade)
- Two (SPST, NO or NC) or three (SPDT) spades
- Spades are ¼” wide, 0.03” thick
-FLXX- (Flying Leads)
- XX = Length in Inches.
- Specify lead length in inches (i.e. -FL18 or -FL30)
- 18” (450 mm) is standard. Max length is 48” (1220 mm)
- Wire specs: 18AWG, PVC sheath
-FLSXX- (Flying Leads w/ PVC Shrink Tubing)
- XX = Length in Inches
- Specify lead length in inches (i.e. -FLS18 or -FLS30)
- 18” (450 mm) is standard. Max length is 48” (1220 mm)
- Wire specs: 18AWG, PVC sheath
- Shrink material: PVC
-ELXX- (1/2” NPT Male Conduit w/ Flying Leads)
- XX = Length in Inches
- Specify lead length in inches (i.e. -EL18 or -ELS30)
- 18” (450 mm) is standard. Max length is 48” (1220 mm)
- Wire specs: 18AWG, PVC sheath
-CABXX- (18 AWG PVC Cable)
- XX = Length in Inches.
- Specify lead length in inches (i.e. -CAB36 or -CAB120)
- 36” (915 mm) is minimum
- Cable specs: 18AWG, PVC Sheath and Jacket
-H- (DIN 43650A Male Half Only)
- Electrical connection pins exit out the top
- Pins follow the DIN43650A Standard
- No mating connector provided
-HR- (Right Angle DIN 43650A Male Half Only)
- Electrical connection pins exit out the side
- Pins follow the DIN43650A Standard
- No mating connector provided
-HC- (DIN 43650A 9 mm Cable Clamp)
- Electrical connection pins exit out the top
- Pins follow the DIN43650A Standard
- Mating connector provided, part # 213947
-HCR- (Right Angle DIN 43650A 9 mm Cable Clamp)
- Electrical connection pins exit out the side
- Pins follow the DIN43650A Standard
- Mating connector provided, part # 213947
-HN- (DIN 43650A with 1/2˝ Female NPT Conduit)
- Electrical connection pins exit out the top
- Pins follow the DIN43650A Standard
- Female conduit threads are ½”-14 Female NPT
- Mating connector provided, part # 213948
-HNR- (Right Angle DIN 43650A with 1/2˝ Female NPT Conduit)
- Electrical connection pins exit out the side
- Pins follow the DIN43650A Standard
- Female conduit threads are ½”-14 Female NPT
- Mating connector provided, part # 213948
-WF- (Weather Pack Connector, Female)
- Two wire devices use the Aptiv (formerly Delphi) 12015792 housing and the 12089188 pins
- Three wire devices uses the Aptiv (formerly Delphi) 12015793 housing and the 12089188 pins
- Recommend ordering with Shrink tubing around the wires (-FLSXX-)
-WM- (Weather Pack Connector, Female)
- Two wire devices use the Aptiv (formerly Delphi) 12010973 housing and the 12089040 pins
- Three wire devices uses the Aptiv (formerly Delphi) 12010717 housing and the 12089040 pins
- Recommend ordering with Shrink tubing around the wires (-FLSXX-)
-DE- (Deutsch Connector, Male, DT04 Series
- Two wire devices use the Deutsch (TE) DT04-2P-E003 housing and the 1060-16-0122 pins
- Three wire devices use the Deutsch (TE) DT04-3P housing and the 1060-16-0122 pins
- Recommend ordering with Shrink tubing around the wires (-FLSXX-)